Connecting...
start
Printer is now online.
echo:Marlin1.0.0
echo: Last Updated: Jan 11 2016 17:07:08 | Author: (JC, JcRap)
Compiled: Jan 11 2016
echo: Free Memory: 3353  PlannerBufferBytes: 1232
echo:Hardcoded Default Settings Loaded
echo:Steps per unit:
echo:  M92 X160.00 Y160.00 Z8000.00 E200.00
echo:Maximum feedrates (mm/s):
echo:  M203 X400.00 Y400.00 Z1.00 E45.00
echo:Maximum Acceleration (mm/s2):
echo:  M201 X1000 Y1000 Z100 E1000
echo:Acceleration: S=acceleration, T=retract acceleration
echo:  M204 S1000.00 T1000.00
echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s),  Z=maximum Z jerk (mm/s),  E=maximum E jerk (mm/s)
echo:  M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00
echo:Home offset (mm):
echo:  M206 X0.00 Y0.00 Z0.00
echo:PID settings:
echo:   M301 P49.83 I6.99 D88.78
echo:SD init fail